Difference Between Residential & Industrial Breakers

What is the difference between residential and industrial breakers?

  1. Residential circuit breakers
  2. Industrial circuit breakers

 

Circuit breakers are tasked with protecting an establishment’s electrical circuits from being damaged by power surges and short circuits. These breakers work by interrupting the power flow during one of these surges, ensuring that electrical products within that location would not be damaged by power overloading.

These circuit breakers are some of the most important electrical products around, as residential and industrial areas use circuit breakers from trusted electrical suppliers in Metro Manila. Circuit breakers can be classified between residential and industrial. Each type provides protection to their designated areas and performs the same basic functions, but there are some differences that are worth noting to make sure that you will be able to get the ideal circuit breaker in your home or workplace.

 

Residential Circuit Breakers

Residential Circuit Breakers

Before residential circuit breakers became the standard in homes, most households used fuses to protect circuits whenever overloads and short circuits occur. There is a wire inside the fuse that would melt in order to interrupt the power flow. The fuse would then need to be replaced after. While fuses are effective in doing their job, the constant need for replacement after power surges is both inefficient and dangerous, especially when short circuits happen.

One of the advantages of using residential circuit breakers is that you would no longer have to replace fuses, as it would only need to be reset after a power surge so it can be used again. It is worth noting that there are different types of residential circuit breakers that help protect crucial electrical products from getting damaged. Here are some of these types:

 

Miniature Breakers – One of the most common types of residential circuit breakers, miniature breakers are used for low voltage systems in a household. An example of a miniature breaker that you can get from an electrical supplier in Metro Manila is the Meiji JVM16-3P and the JMV16-2P. These miniature breakers are handy during unexpected power surges, protecting your electrical products from breaking.

Arc Fault Circuit Interrupters – AFCI breakers are essential in preventing electrical fires, which are some of the most dangerous hazards that can happen during the power surge.

Ground Fault Circuit Interrupters – Used for areas like bathrooms and kitchens, GFCI breakers are used to protect against electrical currents that might come into contact with water and other types of liquid.

Single Pole – These breakers are used for outlets and switches in a home, which are the most common locations in which electrical products are present.

Double Pole – A stronger and larger type of circuit breaker that can handle higher voltage electrical products, the double pole breaker functions similarly to its single pole counterpart.

 

Industrial Circuit Breakers

Industrial Circuit Breakers

Various industries, especially the ones involved in manufacturing and processing, use a slew of machines and tools that require a lot of electrical energy to use. Electrical products that are damaged during power surges and short circuits will not only compromise operations, they are also very costly. It is best to use industrial circuit breakers to be able to protect these machines and keep them running afterwards.

These industrial circuit breakers are larger, which allows them to handle higher voltages. Industrial breakers can also be part of an electrical safety system, which provides more control over which areas have been hit with power surges, and ensure that each area will be protected accordingly. Here are some of the common types of industrial circuit breakers:

 

High Volt Industrial Breakers – Found in transmission circuits and networks, these circuit breakers are tasked with protecting crucial equipment from getting damaged. These breakers also have systems in place to counter these hazards in case of emergency, allowing them to become a preemptive protective measure.

Medium Volt Industrial Breakers – While these breakers are smaller versions of high volt breakers, they still have protective systems in place to prevent power surges.

Low Volt Industrial Breakers – Used for smaller equipment, these breakers are for lower voltage facilities and machines, and are very common in different industries.

Industrial Electromagnetic Breakers – These breakers activate in times of high magnetic activity, which in turn breaks the circuit immediately.

Industrial Thermal Electromagnetic Breakers – These breakers protect electrical products from a variety of power surges triggered by magnetic activity and changes in temperatures. The breaker responds to different levels of power surges, allowing circuits to be broken once they have reached a certain threshold.

 

Key Takeaway

Circuit breakers are one of the most important electrical products today. They provide protection from unexpected power surges and short circuits to ensure that your outlets, appliances, machines, and tools are safe from damage. Different types of circuit breakers offer up their own set of benefits in terms of providing protection, which is why choosing the right one would allow you to provide the best electrical safety system available.

Where to Place Your Smoke Detectors In Your Home Or Workplace

Where to Place Your Smoke Detectors In Your Home Or Workplace

Where should you place your smoke detectors in your home or workplace?

  1. Where to Place Smoke Detectors In Your Home
    • Bedroom
    • Living Room
    • Kitchen
  2. Where to Place Smoke Detectors In Your Workplace
    • Storage areas
    • Meeting Room
    • Parking Garage

 

In order for smoke detectors to do their job protecting your home and workplace, it is imperative that you place them in the right areas. High-quality smoke detectors from a trusted electrical supplier in Metro Manila can only function to its full capacity when they’re properly situated.

One of the most important things to take note of is that smoke rises. This means that you should be installing a smoke detector on every level of your home or workplace. In order to detect smoke in a large property, it would also be for the best to invest in more alarms.

Read on to learn more about the most ideal places to place your smoke detectors in your home or workplace.

 

Where to Place Smoke Detectors In Your Home

Where to Place Smoke Detectors In Your Home

The first indication of a fire that you will detect is the smoke that emanates from it. Without the aid of a smoke detector, you may only be aware of the fire once it is too late. When placing smoke detectors in your home, you should avoid installing them near openings that could interfere with its system. These openings include doors, windows, and air conditioning units.

Once the smoke detector senses smoke in the area, it will then emit a loud alarm. Meiji’s MSD-01 Smoke Detector is made up of high-quality parts that ensure its reliability. The sensitivity of the sensor can help detect even the earliest signs of a fire. The alarm of its electronic horn also has a wide reach in order to alert residents from anywhere inside the home.

 

Bedroom

You are left at your most vulnerable when you are peacefully sleeping on your bed. Smoke detectors are a good investment for instances wherein a fire breaks out while you are asleep. These detectors should be placed inside every single bedroom in your home. You should also install detectors in the hallway right outside each bedroom.

Thinking ahead and investing in smoke detectors can help you live a worry-free lifestyle.

 

Living Room

Fires can break out at any time. One of the reasons that fires can start is if a wire short circuits. Think of your living room; it is probably filled with Electrical wires that are strategically placed behind your walls. In order to prepare yourself for any sudden short circuit incident, install a smoke detector in your living room.

Keep your smoke detector at least ten feet away from the kitchen in order to prevent any false alarms. This is because the heat and smoke from cooking appliances could be falsely detected as a fire, triggering the alarm.

 

Kitchen

There are a number of appliances in your kitchen that could be the source of a fire. In order to alert other people in the household in the case of a fire, install a number of smoke detectors within your kitchen area. Take note that these should be installed at least ten feet away from any kitchen appliances.

The sensitivity of smoke detectors can also be adjusted to sense a certain temperature in order to not detect false alarms caused by the heat from your appliances.

Just like your home, there are also certain factors you should take into consideration when installing smoke detectors in your workplace.

 

Where to Place Smoke Detectors In Your Workplace

Where to Place Smoke Detectors In Your Workplace

The 2008 Revised Fire Code of the Philippines or Republic Act No. 9514 requires commercial establishments to install safety warning systems such as smoke detectors in every building. These detectors are mandated by law to be placed either in every room or on every story of the property.

If you have a large building, it may be for the best to install smoke detectors strategically, as smoke detectors can detect up to 10-40 feet, which means high ceilings and large halls might need smoke detectors around each side or corner to ensure fire hazards would be intercepted.

The placement of smoke detectors in workplaces is crucial because of the large number of people that work within the building. In order to keep these employees safe, it is important that you take into consideration even places that are not visited as often, such as storage areas.

 

Storage areas

The danger with storage areas is that this location is not always visited. This means that if a fire starts in this area, it may take some time for people to notice it. In order to maintain the safety of every employee, it is important that you place a smoke detector in storage areas and in other less visited places. If your storage area is in a basement, install a smoke alarm at the bottom of the staircase and on top of the staircase.

 

Meeting Room

Another area of your workplace that might not always be used is the meeting room. Fires could start in an unused meeting room for a number of reasons. As such, it is important to install a safety device with a loud alarm in order to best alert employees of the situation. Meiji’s MSD-02 Smoke Detector has an alarming alarm of 85 decibels every three minutes.

Besides these enclosed areas, an area that might be difficult to spot fire is in a parking garage.

 

Parking Garage

Similar to kitchens in homes, smoke detectors can be falsely triggered by car emissions in a parking garage. As such, it would be best to adjust the sensitivity settings of smoke detectors placed in this area in order to detect a certain temperature. Install these detectors no more than 12 inches away from the ceiling in order to better detect the smoke as it rises.

Take note of these places in order to find the most ideal spots to place your smoke detectors both in your home and in your workplace.

 

Key Takeaway

Even if you bought a number of units of the best quality smoke detectors from a trusted electrical supplier in Metro Manila, it would not reach peak efficiency without the right placement. Be proactive in your positioning in order for you to be prepared for any fire-related emergency. Take into consideration the different possible fire sources within your home or workplace in order to plan the layout of your smoke detectors.

Trust professional electrical suppliers in Metro Manila such as Meiji for the most reliable smoke detectors that you can install into your home or workplace.

How Weather-Proof Electrical Products Can Help You Keep Safe During the Rainy Season

How Weather-Proof Electronics Can Help You Keep Safe During the Rainy Season

How do weather-proof electrical products keep you safe during the rainy season?

  1. Keep electrical products out of the rain
  2. Weather-proofing your electrical products outdoors
  3. Benefits of using weather-proof electrical products

 

The rainy season is upon us once again. That could mean trouble for the electrical products that you just bought from your electrical supplier from Metro Manila. Rainwater can be considered one of the biggest hazards to any electrical product as it can cause a lot of damage and a plethora of safety hazards.

This makes weather-proofing your electrical products during this season an important priority. You need to keep these products safe from the rain in order to keep them running. Along with some handy weather-proof products, here are some effective ways to weather-proof your electrical products during the rainy season.

 

Keep your electrical products out of the rain

Keep Your Electronics Out Of The Rain

The first and most basic step of weather-proofing your electrical products is to make sure that these products are far from any exposure and rain as much as possible. While there are certain electrical devices that can be set up outdoors, any electrical product that can be damaged by rain or any form of liquid must be kept indoors and at a safe distance away. These products used outdoors can include power tools, lighting fixtures, gardening tools, and even generators.

It is best to check for any electrical appliance outdoors and unplug them when it starts to rain. Keeping your electrical products away from the rain will ensure that no device or product will be damaged. You’re also making sure that people in your home or workplace are not being harmed by electric shocks. Extreme forms of electric shock can be dangerous and sometimes even fatal. The sparks generated from compromised electrical equipment can also be a cause for electrical fires and other damage to your home or workplace. As soon as the first signs of rain are present, the best approach is to take electrical tools and devices indoors for optimal safety.

 

Weather-proofing your electrical products outdoors

Weather Proofing Your Electronics Outdoors

After keeping most of your electrical appliances indoors and away from the rain, the next step is to weather-proof your outdoor electrical products, such as electrical outlets and circuit breakers. Weather-proofing is crucial in these areas since these electrical products are exposed to a variety of external elements that can damage them, causing more problems and safety issues that can harm your home or workplace.

Using weather-proof products is the best approach to protect your home or workplace from the rain and other elements. A good example of a weather-proof product you can use outdoors is the Meiji Classic Series: MCS 2204. The IEC certified outdoor electric outlet provides a protective cover against liquids that can enter your electrical products. The MCS 2204 has an IP65 rating, which ensures that your outlet is protected from dust ingress and low-pressure water from any direction.

Weather-proof enclosures are also another handy product to have. These can protect your circuit panels and breaker switches, both of which are crucial to your power supply. Products like the Meiji MHWP series offer the best protection from rain, dust, heat, and even ultraviolet radiation. These highly durable and affordable enclosures ensure that your electrical products and power supply will be safe from outside elements.

 

Why use weather-proof electrical products?

Why Use Weather Proof Electric Products

Weather-proofing electrical products offer a huge number of safety benefits that would protect your home or workplace from outside elements. Here are some important reasons as to why using weather-proofing electrical products will help you keep safe during extreme weather conditions.

 

Resistant to extreme conditions

Along with being able to protect your outdoor electrical products from the rain, using weather-proof electrical products also allows you to protect your electric outlets and circuits from other elements such as dust and heat as well. In countries like the Philippines where the summer and rainy seasons come and go alternately, it is important to be prepared for both extremes.

The rainy season can be the most damaging due to instances such as flooding and leakage which can harm compromise your electrical products and harm the people in your home or workplace. Electrical fires during the rainy season can be caused by exposed outlets and circuit panels that come into contact with liquids. This is why weather-proofing is the best step to take. By using weather-proof products, you will be able to provide the best protection for your electrical devices.

 

Improved safety of your home and workplace

Safety is of utmost importance in any home or workplace. Using weather-proof electrical products ensures that your outdoor electrical products will be provided with improved safety. These weather-proof products comply with international safety standards. This means that these products have passed a variety of safety checks and that everything would be much safer than before. Safety is always a primary concern, and adding some weather-proofing to your home or workplace will only bring about more benefits.

 

Key Takeaway

 

The rainy season can be one of the riskiest times of the year for electrical devices. Improving the safety of your home and workplace by using weather-proof electrical products allows you to weather the storm and keep everything safe. Weather-proofing is a must for any location, and these handy tips will surely help make rainy days that much more bearable.