valentinesIt’s the love month again, the time of the year when we’re totally smitten by the love bug. Some couples toast champagne over a romantic dinner for two, wander across the dreamy night sky and cherish every minute. While a chosen few prefer to be extraordinary, and put together a simple yet very personalized date at home. This way you skip the city traffic and have a more memorable Valentine’s date. Just imagine, what if after all the careful planning for this special, one night only event of your year, power outage suddenly struck?  I could just imagine the frustration you would feel.

But hey, don’t fret! The Meiji Electric Contactor Transfer Switch (CTS) is here. Don’t let brownouts or sudden power outages ruin your romantic date! The CTS will automatically transfer power to the generator when utility power fails, providing the highest protection for continuous power in homes and establishments. The CTS basically works like an Automatic Transfer Switch (ATS), except that a CTS uses Contactors as its main component while an ATS utilizes the conventional Circuit Breakers. The advantage of a CTS over a conventional ATS is that you may use any load in your home without having to buy a big genset to power up 100% of your load. This is made possible through a Current Limiter that can sense overload before it reaches the genset, unlike the conventional ATS where your loads are fixed or inadequate due to a limited genset.

You can use any load in your home depending on the
situation. For example, this Valentine’s day, you would like to have power in your cozy dining room with aircon, all you need to do is power up the load in that specific area and not use the other loads so as to avoid exceeding the gensets’ capacity. On other occasions, you can choose to power up your master’s bedroom, children’s bedroom, or an elderly persons’ room depending on the situation. That way, you do not need to use any extension set or octopus wiring due to some fixed loads of a conventional ATS system.

In an event that you accidentally overload the CTS, you will have nothing to worry about since the CTS will temporarily cut off power. All you need to do is turn off some loads so your power consumption will still be within the capacity of your genset. The system will then reset itself and supply genset power back within a pre-set time. To make it even more convenient, the CTS will sense when the utility power will come back and simply switch back to normal power, so you can continue with your activity without any interruptions.

MEIJI CTS

MEIJI CTS

With the Meiji Electric Contactor Transfer Switch (CTS) you are sure to have an uninterrupted date! So whether you’re harnessing your inner Master Chef to cook dinner for your spouse, watching a romantic movie, or just enjoying each other’s company, when the power goes out you’ll have no worries! Everything will be perfect because you have your reliable Meiji Electric Contactor Transfer Switch to back you up!

For those of you who would rather opt for the Manual Type Transfer Switch (MTS), Meiji Electric also has a complete line of MTS ranging from 1 Ampere to 6300 Amperes.

Inquire now at 448-7423, 413-6636 or 727-5790 to get more details on Meiji Electric’s CTS and other related products, and see how we can enhance energy to your everyday living!

Unplanned power outages or brownouts are most likely to happen in the Philippines especially at times when typhoon hits our country. And because of this, a lot of unwanted damages may happen to your home, including your appliances, gadgets and even your family. Rain and thunderstorms sometimes make brownouts unavoidable. To minimize inconvenience, discomfort and danger, prepare ahead for the possibility of severe weather.

Here are some tips on what you should do:

  • CEmergency Preparedness "ready to go" kit.reate an emergency kit with a battery-powered radio, battery-powered clock, flashlights, candles, extra batteries, matches, a first-aid kit, a fire extinguisher if possible, bottled water and non-perishable food. Remember that flashlights are safer to use than candles.
  • Use  Voltage Protectors to safeguard your important electrical devices and appliances.
  • Avoid opening your refrigerator or freezer during a power outage. It is safe to have Automatic Voltage Regulators (AVRs) associated with your equipment as power outages and continuations are unexpected.
  • unplugIf someone in your family needs electronic medical equipment make sure you have an alternative power supply before the typhoon hits. Generator plus a Transfer Switch are very useful and convenient especially at times like these. If you don’t have yet, make sure to acquire one, particularly Contactor-type Transfer Switch (CTS) as soon as possible for future preparation.
  • Unplug appliances with sophisticated electronics such as DVD and Blu Ray players, televisions, computers and microwave ovens so they aren’t damaged by a surge when the power comes back.
  • Leave one light on so you’ll know when power is restored, and then gradually reconnect your remaining appliances to avoid overloading the circuits.
  • downloadAfter the typhoon, replace used batteries in your emergency kit and re-stock food and water to be prepared for the next typhoon.

 

 

Meiji Electric carries an efficient and effective line of Voltage Protectors like the general use TC-V001, or the one that has eight programmable timer options TC-V002, and the aircon to fan timer TC-V003. Also, the company has a complete line of Servo-type AVRs with wattage ratings from 500 to 10,000 watts. And for the Transfer Switch, Meiji Electric offers you Manual Transfer Switches (MTS) from 1 ampere up to 63 amperes, and the innovative Contactor-type Transfer Switch (CTS) starting from as low as 100 up to 1200 ampere ratings. All of these devices are reliable, of high quality and will definitely provide safety and convenience to your home.

Following the above-mentioned tips will make it easier to cope with power outages or brownouts during typhoons. Always be reminded to acquire protective devices only from a trusted supplier. Think ahead and be prepared for an emergency by having a plan for your home. At the end of the day, you wouldn’t want to risk the lives of the ones you treasured the most.

There are times wherein we need power supply very badly, especially during a power outage. For instance, you have deadlines to meet so you need to use the study room, or you want to use the living room where you can spend quality time with the family. How about if you have a sick person who needs air conditioning and medical equipment in a room? Or what if you have a party that needs uninterrupted power at a specific area?

Hospitals require back-up power application when blackouts happen. They must continue operations even during power outages for the sake of the patients. The same can be said for critical operations of other companies.

You need a hassle-free automatic transfer switch. Meiji Contactor Transfer Switch (CTS) is the answer to all the above concerns! You may now conveniently do so during a power outage with Meiji CTS. And you will never overload your generator.

.

20140724_101923

Usually, homes acquire generators with just the right power to be used for emergency purposes, which means the generators cannot serve 100% of your loads. When you want a certain appliance to be powered up, or only few specific rooms to be lighted, Meiji CTS gives you the versatility to choose and power up only the selected loads. Isn’t that convenient? With its Current Limiter, which provides safety from overloads, your home can never be in danger.

When it comes to back-up power applications, Meiji CTS provides high-quality and reliable performance. Meiji CTS gives you the convenience of using the same feeder lines for the load side during emergency power. There is no need to fix certain loads with an emergency feeder line, and with an emergency panel.

You therefore can save on additional wires, pipings and panel. Yet you get the flexibility of using any loads without worry of overloading the generator. This is because the Current Limiter will automatically cut off power at any overloads, will automatically reset and will allow you to reduce your loads accordingly. In case you have unintentionally used loads more than what the generator can handle, power will temporarily be cut-off, the CTS will automatically reset, to give you time to reduce your load, then emergency power will resume at a pre-set time.

When normal power comes back, the Meiji CTS will automatically transfer power to the normal side. The generator will then also automatically turn off. There is no need again for any manual turning on and off of the circuit breakers or double-throw switches and generator.

20140724_101853

Meiji CTS are being used at homes, commercial establishments and even industrial buildings, in a cost-effective package, with outstanding performance, reliability and versatility.

Contact us today for more detailed information, and let us be the one to provide you the best automatic transfer switch you can ever have!

 

As back-up power sources become more common in residential construction, many homeowners like us have learned about the needs and benefits of transfer switches. Most of us know that in the event of a power supply outage, it is at the very least desirable to power up selected circuits in a service entrance panel to provide limited light, heat, and refrigeration. Having the option of operating a transfer switch or having the peace of mind while the power returns back to normal is a very wise and safe option.

Meiji Contactor Transfer Switch (CTS) is designed for a standby power application. It provides flexibility, reliability and  high quality performance in a compact package. Meiji Contactor Transfer Switch provides fully effective transfer in applications where a momentary loss of power is acceptable during transfer and re-transfers between normal and emergency power supply.

MTS and CTS

other MTSWith a manual transfer switch in place, you would first have to make your way to the service entrance panel. Many times, this would be done in the dark with a flashlight in hand. After discovering that the electric utility outage takes longer time, you must manually turn on the switch, allow it to come up to speed and stabilize, and then throw the lever on the transfer switch into the generator position. Prior to switching over to standby power, you would have to shut off individual breakers for non-essential branch circuits.

On the other hand, a Contactor Transfer Switch (CTS) is a transfer switch that brings the accessibility of utilizing the same feeder lines during emergency power, with a current-limiting device that can help you regulate the amount of energy to be given each specific load when the power runs out.

CTSIts primary feature is convenience as it allows you to turn on all the loads you want your generator to give power to. This is because of its current limiter that can detect overloading. So your CTS saves you the hassle of memorizing which breakers are the only ones allowable to turn on, the stress of turning off all breakers and turning them on again once power is back, instead when it senses an overload, the current limiter will cut off power to the contactor.  When this happens, the generator runs at no load, thereby protecting it from any overload. There’s an automatic timer that will bring back power again at the pre-set time of your choice. You then just have to turn off the non-essential loads to avoid another power cut-off. You may also pre-set a time delay of your choice during power transfer to avoid damages to compressor loads due to sudden power surges.

All of these actions take place with no human intervention. This brings less hassle in your part as you don’t have to be walk along the dark way going to your controls.

Because technology makes life easy, Meiji Electric goes with its flow on enhancing our daily lives, whether in residential, commercial or industrial establishments. Every appliance that is connected to the line, and backed up by a generator, needs a transfer switch for shifting power sources when needed. Hence, we encourage you to maximize your generator with Meiji Contactor Transfer Switch.

DSC03247

Meiji Contactor Transfer Switch (CTS) is designed to provide matchless performance, reliability and versatility for back-up power applications. It quickly and safely shifts the load circuit from a normal power source to the emergency source, permitting light and heavy-duty loads to continue running with minimal or no outage in momentary losses of power.

A Contactor-type Transfer Switch is electrically operated and mechanically held. It operates faster than a breaker-type transfer switch which reduces transfer time. It functions accurately in forming the interface between the generator set, utility power and the consuming electrical equipment. It monitors power sources when power failure happens. The built-in contactors are installed for frequent switching of the load current and commonly used as a part of the motor starters.

When the utility power fails, the CTS will signal the generator to start. If the generator has reached operating speeds with precise frequency and voltage levels, the transfer switch will disconnect the utility source and connect the generator. The design of the CTS contacts makes it impossible for both sources to be connected simultaneously.

After the utility power is restored, the CTS returns the load to the normal power. A generator cool down timer is then initiated. After the cool down period, the generator automatically shuts down the CTS back into monitory mode and stands ready for the next power outage. The CTS also regularly runs test cycles to make sure your backup generator is ready when you need it.

Buildings which utilize a generator power to keep critical circuits running like fire pumps, computer systems, gaming, and hospital equipment should use an automatic transfer switch, particularly CTS. Home circuits will be conveniently electrified when the 100% generator power can be utilized to a preferred area of the house as ordinary ATS can’t.

Every equipment that is connected to the line and backed up by a generator set needs a transfer switch for shifting the power sources when needed.

Make sure to go for a reliable and appropriate automatic transfer switch, especially Contactor-type Transfer Switch to maximize the power usage and experience total convenience during power outages.

 

With Meiji CTS, your investment is worth it!

 

As technology continues to advance, some might neglect the natural energy we can get from Mother Nature. To be significant, we should utilize what has been naturally entrusted to us and at the same time, enjoy the perks we can get from our natural resources.

rERenewable energy, as defined by Wikipedia, is the power that comes from resources that are naturally replenished like sunlight, wind, rain, tides, waves and heat energy stored in the Earth.

Renewable energy substitutes the usual fuels we use in running motors, energy services and electricity generation. The mainstream renewable energy sources are wind power, hydropower (energy in water), biomass (energy from plants materials), geothermal energy (energy stored in the earth) and solar energy.

And because it is widely used all over the world mainly in power plants, business establishments and even in our homes, it results to significant energy security, climate change treatment and a lot of economic benefits.

There is a strong support of promoting renewables sources particularly solar power and wind power. These kinds of energy source provide 19% of electricity generation worldwide including households.” -International Public Opinion Survey

 According to the Renewables Global Features report last year, 2013, national renewable energy markets are projected to continue to grow strongly in the coming decade and beyond. Here in the Philippines, specifically in Palawan, there will be a large micro-grid power plant generating clean renewable energy.

Some local residents nationwide have renewable energy technologies (Solar Panels, Wind turbines, etc.) already. With these advances, it would be cost-efficient  for you to have another source of power aside from the usual distributor of electricity power (MERALCO).

You can definitely use renewable technology with or without generators as a substitute for emergencies especially when you experience power outage in a home.

Manual Transfer Switch1

As we are informed, we cannot use both emergency power and normal power (MERALCO) at the same time, or else, it would start a fire or even blow out a house.  In this case, a Transfer Switch is a necessity.

With the help of a transfer switch with a built-in interlocking system, may it be manual or automatic transfer switch, we can easily transfer power from one source to another safely.

Meiji Electric offers three types of transfer switches, Manual Transfer Switch (MTS), Automatic Transfer Switch (ATS) and Contactor Transfer Switch (CTS). With MTS and ATS, you can make your home more comfortable during  brownouts. The type of transfer switch that would match up with your generator and/or renewable technology depends on their capacity and ampere ratings.

Normally, we use any of the three in a household setting. But for institutions with industrial setting, like power plants, the MEIJI Automatic Transfer Switch (ATS) is the appropriate one to use. An ATS, by the term itself is a system that automatically transfers your emergency power when normal power is unavailable and automatically transfers back to normal power when power returns. This type of Transfer Switch brings ease and security to you because you don’t need to turn on and off any power source by yourself.

 

CONTACTOR TRANSFER SWITCH

Meiji Contactor Transfer Switch

Some home owners find it more convenient to use Meiji Contactor Transfer Switch (CTS). CTS is a transfer switch that brings the accessibility of utilizing the same feeder lines during emergency power, with a current-limiting device that can help you regulate the amount of energy to be given each specific load when the power runs out.

It has an automatic transfer switching which safeguards you and your home from overloading the generator with a current-limiting and automatic resetting of power at your pre-set time.

You can make your home safe and comfortable during a power outage and peacefully enjoy bonding time with the family. The same with corporations, they can work continuously without being interrupted by energy disconnection and other sudden electrical cut-offs. Remember that down-time costs double, you pay for regular work without producing anything.

Technology can really make people’s lives easier without harming the environment.

Thus, Meiji Electric responds to everyone’s needs as we all embrace its continuous development. With Meiji, go along freely with the flow of innovations on green energy.

 

For us unknowing people (yup, that includes me), the importance of having a transfer switch is one of the irrelevant things to even think about. What it does? We may not know. What more about the benefits we can get from it, right? So let us all take a crash course on transfer switches, and maybe after reading this article, we can all say “Oh so that’s what it is…We should have one at home.” If we do, then this article is effective.

What is a Transfer Switch?

According to Wikipedia, a transfer switch is an electrical switch that reconnects electric power source to a standby source. It can be either manual or automatic in terms of its operation. It is often used with a back up generator so that when the power goes out, the switch will transfer the electricity to the generator, providing temporary power. It is basically a link to your back up generator and the utility company.

Why Have It at Home

A transfer switch, practically, is a safety equipment. It not only looks after your safety and the people in your house, but also the workers in the power company. They become protected when the switch is installed properly, as it isolates the generator from the power lines. That is why in some places, it is a requirement to have a transfer switch.

One can choose from a manual or an automatic switch. Having a manual switch will require you to start your generator and connect it to the transfer switch, then let the generator provide power for your house. On the other hand, with an automatic, everything I mentioned in the manual procedure will be done as soon as the power shuts off. No need for you to stand up and do it. Like I said, it’s automatic. In a heartbeat, I recommend you take the automatic. Your children will be away from harm that way, too. Are you already convinced?

Transfer Switch for Generators

Not all the time there is a man in the house, and yes it can be normal to have a power out sometimes, but what if it’s just you (let’s say you are a clueless female) and the kids? Not everybody can operate a generator. This is where a transfer switch comes to the rescue.

Transfer switches bring safety and convenience to a humble home.

So now we are informed. Together, let us exclaim “Oh so that’s what it is…We should have one at home!”

Manual Transfer SwitchWhat is a Tranfer Switch? I bet if you’ve been living for a year in the Philippines, you’ve experienced at least once… nah, I’ll be kind to say at least thrice – of having power shortage or what we would normally call, “brown-out!” So when it happens, you slowly reach out for your handy emergency light to finish whatever it is that you’re doing. But what if you’re cooking using an electric stove when the power got cut? How do you continue? Or when you were watching a really nice movie and the hero was just about to save the day! You were left hanging because of the power outage – what do you do? How do you respond to your kids who desperately need to finish their homework with a strict deadline the next day? Answer: GET YOURSELF A TRANSFER SWITCH!

When we say ‘transfer switch’, we mean transferring power from one source to another. So we can say, from using Meralco power source, we now transfer source to your Genset or Generator. Now, having said this, we can get the logic that you can only make your transfer switch work when you’ve already bought yourself a reliable Genset. In choosing which Genset to buy, you first need to establish what percentage of Meralco power you need or want to work during a power outage. If this is inconvenient for you to compute, then you may just check what loads: wattage and ampere ratings of the appliances you need or want to work. After doing so, then you’re all set for your transfer switch.

Transfer SwitchesNow you may say what about the conventional “Double Throw Switch” that my friendly engineer-technician recommended? Well, aside from it’s unappealing in nature and the need to move the lever up or down; it merely makes up of a barrel bolt that highly risks your (the users’) safety. What do I mean? In light of a transfer switch features, let me help you understand.

A transfer switch is a compact, light weight and very user-friendly mechanical device with a built-in interlocking system that does not allow you to switch on both your Normal power source (MERALCO) and the Emergency line (GENSET). Turning on the Emergency side breaker will automatically switch off the Normal side avoiding any faults on your power source that may cause extensive damage such as fire, explosions and the like to your main panel board. On the other hand, the Emergency side will have to be switched off first before the Normal side can be switched on. This will then be an advantage of the so-called Manual Transfer Switch (MTS). These are available in 2×1 pole, 2×2 pole, 2×3 pole, with models starting from 1A. How about the price you say? As we have already mentioned earlier, your Genset will depend on the loads you want or need to work therefore, the Transfer Switch also depends on the load of the Genset you’re using. So ultimately, the price depends on you. So now, be sure to inform your engineer-technician that you’ll definitely be using a Transfer Switch than a Double Throw one.

Now that you know how to choose your Transfer Switch, how it works and its basics features from the MTS earlier, allow me to inform you of the two other types. Don’t worry, I’ll only brief you into them at least before a sales agent pitches in his or her talk, you are not at their mercy.

Automatic Transfer Switch. An ATS by the name itself is a system that automatically turns on your Emergency Power when Normal Power is out and automatically shuts off your Emergency Power and turns on Normal Power when it comes back in. This type of Transfer Switch highlights convenience and safety for you (the user) as you don’t need to personally turn on or off any power source. And more importantly, like the MTS, it avoids accidentally turning on both power sources.

An ATS is a Circuit Breaker type that is electromechanically operated that does that for you since there is an electromechanical circuitry unlike the normal breaker in your bathroom heater that you have to manually turn on and off. You would just have to fix the loads set on your Generator for emergency purposes.

CONTACTOR TRANSFER SWITCHLast but definitely not the least is the Contactor Transfer Switch (CTS). Like the ATS, the CTS’ primary role is to promote safety by automatically turning on and shutting off your Genset in cases of power outages. Its primary feature we can say is convenience. Aside from the above-mentioned, it also allows you to turn on all the loads you want your Genset to give power to. This is because of its current limiter that can detect overloading. So your CTS saves you the hassle of memorizing which breakers are the only ones allowable to turn on, the stress of turning off all breakers and turning them on again once power is back, instead when it senses an overload, the breaker just ‘trips’ or cuts off power. At first, you have to do a trial and error to find out up to how much your Genset can handle. But once you’ve established that, when power is out or comes back, you’ll just have to wait about 3-5 minutes for the delay. This is to protect your breakers from the electric surge when power comes back. So once this has been established… then clap, clap, lights on!

So whether you were cooking a romantic dinner for your spouse, watching a great movie with the family or in desperate cramming mode to finish your homework, when the power gets cut, no worries! You know you have a Transfer Switch doing its work!

CONTACTOR TRANSFER SWITCHThe MEIJI Contactor-type Transfer Switch (CTS) gives you the convenience of using the same feeder lines during emergency power (generator), with a current-limiting device that can give the user flexibility in adjusting the amount of power to be given each particular load during power outages.

– Automatic transfer switching of power (no need for manual operation – MTS)

– No separate set of wirings and pipings needed

– No danger of overloading the generator with a current limiting device and automatic

resetting of power at your pre-set time

– Pre-wired system upon delivery and with one(1) year warranty

– Free supervision within Metro Manila upon energization of the system

– Free estimate on going projects within Metro Manila

Contact us!

Send us an Email and we'll get back to you immediately

Tel Nos.: (63-2) 448-7423, 414-4012, 727-5790
Fax No. : (63-2) 410-3270
Or visit us at our Showroom at
Unit 15 Landsdale Arcade, Mother Ignacia, Quezon City
OR
1 Mabolo Street, New Manila, Quezon City

Name

Email

Mobile No.

Subject

How can we help you?