The New Look of MEIJI AVRs!

Meiji Servo-motor AVRs

500-1500VA

Hello friends! In line with our privilege to provide you with the best quality and service of AVRs, allow us to introduce the new look of Meiji AVR 500-1500 VA.

Included still is a convenient switch for easier turn-on and shut-off without the need of pulling the plug from your wall outlet.

Still having the same features from the previous AVR, 3: 220V outlet and 1: 110V, fuse protection, delay and a quick start button, we have been serving you but now with more properly connected wires for your safety and easy maintenance.

2000-3000VA

Still having the same number of outlets: 2-220V, 2-110V.

With its new Quick start button in front for your convenience and pleasure; no need to wait for 3-5minutes delay!

Having also a new feature of a breaker reset-type type instead of a fuse; eliminating the hassle of replacing it each time there will be fluctuations in your electricity that will cause an over or under-voltage.

Not to mention, a more compact type that will save you more space!

Meiji AVR features

5000VA

For this item, we really revitalized the look! Now having a more compact size, Meiji SVC-5000W also has a built-in Manual Transfer Switch (MTS) for your choice of servo-motor type or relay-type!

Still with your choice of 2 outlets: 1-110V; 1-220V.

Try and see for yourself the difference of how AVRs are supposed to work for you!

15 responses to “The New Look of MEIJI AVRs!”

  1. Dr. R M Villarica says:

    Can the SVC1500 take a load of 1,000 watts at 110 volts?
    Thanks

    • John says:

      Hi Doc,

      If your 1000 watts equipment is motor operated or has cooling/heating element, then a 1500 watts AVR would not be good enough. 3000 watts or higher will do.

      Thanks!

  2. Monalisa ignaccio says:

    Hi
    I need an AVR for my (2units)2.5HP split type INVERter aircon
    (2units ) 1.5 hp split type inverter
    1 unit refrigerator.

    Thanks,
    Mona

  3. Maribel Pangilinan says:

    Hi Sir/Ma’am,

    Good morning! Do you have AVR for Elevator?

    Please see below requirements.

    1. 7units – 120KVA

    2. 2units – 45KVA

    Technical Specifications:

    · Input : selectable from 368VAC to 552VAC 3Phase (±20%)

    · Output : selectable from 368VAC to 552VAC 3Phase (±1%)

    · Frequency : 50 / 60 Hz

    · Capacity : 45KVA / 120KVA

    · Response Time : 0.1 sec

    · Efficiency : > 98%

    · Overload Capability : 150% @ 10sec.

    · Temperature : 0ºC -45ºC

    · Humidity : 0%-95% (non-condensing)

    · Power Line Filter : Transient Voltage Surge Suppressor @ 80kA Surge

    Capacity

    Note: Including the installation.

  4. chynna dela cruz says:

    do you have AVR specs of:
    input: from 176VAC to 264VAC 3phase (+_ 20%)
    output: from 176VAC to 264VAC 3phase (+_ 1%)
    frequency: 50/60Hz
    capacity: 20KVA
    response time: 0.1 sec
    efficiency: >98%
    overload capability: 150% @ 10sec.
    temperature: 0 degrees Celsius to 45 degrees Celsius
    humidity: 0%-95% (non-condensing)
    power line filter: transient voltage surge suppressor @ 80kA surge capacity

  5. Jake says:

    Hai, do you have a NEMA-3R AVR and my load is only about 8-amperes.Thanks.

    • John says:

      Hi Jake,

      Our AVR is designed for indoor only, but we can fabricate NEMA 3R enclosure if you will use it for outdoor. 🙂

      Please check your email for other details.

      Thanks

  6. Lanz says:

    Hi inquire ako 80 units computers ang load and 2 phase or area namin sa Cebu City. Please send me qoutation. Thanks

  7. Mark says:

    Good am sir
    May AVR Po ba kayong na ginagamit sa mga Elevator Po ito Po yung specs building voltage is
    230Volts, 3Phase,60Hz But the delivered Elevator is 400/230V , Motor Power : 5.9 kW ,
    Nominal Current: 24.8Amp
    Max Starting Current: 32.1Amp
    with Step up transformer.
    Can send your qoute and contact number within the day. Thank you

    • John says:

      Hi Mark,

      We only have up to 10000 watts single phase AVR.

      We’ll send our brochure to your email so you can check our products.

      Thank you

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact us!

Send us an Email and we'll get back to you immediately

Tel Nos.: (63-2) 448-7423, 414-4012, 727-5790
Fax No. : (63-2) 410-3270
Or visit us at our Showroom at
Unit 15 Landsdale Arcade, Mother Ignacia, Quezon City
OR
1 Mabolo Street, New Manila, Quezon City

Name

Email

Mobile No.

Subject

How can we help you?