The New Look of MEIJI AVRs!

Last Updated on



Hello friends! In line with our privilege to provide you with the best quality and service of AVRs, allow us to introduce the new look of Meiji AVR 500-1500 VA.

Included still is a convenient switch for easier turn-on and shut-off without the need of pulling the plug from your wall outlet.

Still having the same features from the previous AVR, 3: 220V outlet and 1: 110V, fuse protection, delay and a quick start button, we have been serving you but now with more properly connected wires for your safety and easy maintenance.


Still having the same number of outlets: 2-220V, 2-110V.

With its new Quick start button in front for your convenience and pleasure; no need to wait for 3-5minutes delay!

Having also a new feature of a breaker reset-type type instead of a fuse; eliminating the hassle of replacing it each time there will be fluctuations in your electricity that will cause an over or under-voltage.

Not to mention, a more compact type that will save you more space!

Meiji AVR features


For this item, we really revitalized the look! Now having a more compact size, Meiji SVC-5000W also has a built-in Manual Transfer Switch (MTS) for your choice of servo-motor type or relay-type!

Still with your choice of 2 outlets: 1-110V; 1-220V.

Try and see for yourself the difference of how AVRs are supposed to work for you!

18 responses to “The New Look of MEIJI AVRs!”

  1. Dr. R M Villarica says:

    Can the SVC1500 take a load of 1,000 watts at 110 volts?

    • John says:

      Hi Doc,

      If your 1000 watts equipment is motor operated or has cooling/heating element, then a 1500 watts AVR would not be good enough. 3000 watts or higher will do.


  2. Monalisa ignaccio says:

    I need an AVR for my (2units)2.5HP split type INVERter aircon
    (2units ) 1.5 hp split type inverter
    1 unit refrigerator.


  3. Maribel Pangilinan says:

    Hi Sir/Ma’am,

    Good morning! Do you have AVR for Elevator?

    Please see below requirements.

    1. 7units – 120KVA

    2. 2units – 45KVA

    Technical Specifications:

    · Input : selectable from 368VAC to 552VAC 3Phase (±20%)

    · Output : selectable from 368VAC to 552VAC 3Phase (±1%)

    · Frequency : 50 / 60 Hz

    · Capacity : 45KVA / 120KVA

    · Response Time : 0.1 sec

    · Efficiency : > 98%

    · Overload Capability : 150% @ 10sec.

    · Temperature : 0ºC -45ºC

    · Humidity : 0%-95% (non-condensing)

    · Power Line Filter : Transient Voltage Surge Suppressor @ 80kA Surge


    Note: Including the installation.

  4. chynna dela cruz says:

    do you have AVR specs of:
    input: from 176VAC to 264VAC 3phase (+_ 20%)
    output: from 176VAC to 264VAC 3phase (+_ 1%)
    frequency: 50/60Hz
    capacity: 20KVA
    response time: 0.1 sec
    efficiency: >98%
    overload capability: 150% @ 10sec.
    temperature: 0 degrees Celsius to 45 degrees Celsius
    humidity: 0%-95% (non-condensing)
    power line filter: transient voltage surge suppressor @ 80kA surge capacity

  5. Jake says:

    Hai, do you have a NEMA-3R AVR and my load is only about 8-amperes.Thanks.

    • John says:

      Hi Jake,

      Our AVR is designed for indoor only, but we can fabricate NEMA 3R enclosure if you will use it for outdoor. 🙂

      Please check your email for other details.


  6. Lanz says:

    Hi inquire ako 80 units computers ang load and 2 phase or area namin sa Cebu City. Please send me qoutation. Thanks

  7. Mark says:

    Good am sir
    May AVR Po ba kayong na ginagamit sa mga Elevator Po ito Po yung specs building voltage is
    230Volts, 3Phase,60Hz But the delivered Elevator is 400/230V , Motor Power : 5.9 kW ,
    Nominal Current: 24.8Amp
    Max Starting Current: 32.1Amp
    with Step up transformer.
    Can send your qoute and contact number within the day. Thank you

    • John says:

      Hi Mark,

      We only have up to 10000 watts single phase AVR.

      We’ll send our brochure to your email so you can check our products.

      Thank you

  8. jairo says:

    what is the actual size of your avr with 3000 VA? and do you have a 2-220 V only? and how much is it?

    • John says:

      Hi Jairo,

      Here’s the size 23.5CMH X 23CMW X 26CMD.

      Please note that SVC-3000 watts consists of 2 = 220V and 2 = 110v output.

      Price per unit = Php 8,429.75

      Thank you

  9. Jay Javerto says:

    Hi! I have an inverter aircon 1.5hp window type and my problem is we have a low voltage power (204-207 volts), what would you recommend? we are experiencing P9 error and noise from our ac unit.
    Unit specs:
    230v,1PH,60HZ, 2.6 – 5.6A
    6,000 – 12,940KJ/HR, 625 – 1,310W
    9.6 – 9.8 EER, R420(G):900

    Thank you!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.